Water Bath ( 6 / 12 Holes )
Water Bath 6 / 12 Holes feature double
walled construction with outer chambers designed using duly powder coated
mild steel finish as well as inner bath chamber and lids designed using
superior grade stainless steel so as to provide for optimum functional
support in involved procedures.
The filling of spaces between walls using mineral wool support also helps
in avoiding thermal losses. Further, the presence of temperature controls
delivering accuracy of ±0.5°c as well as systems
availability with 6 holes/ 12 holes of 75mm concentric rings also makes
these suitable for diverse lad procedures.
Features :
- System finding suitability for boiling as well as general purpose
working
- Water bath developed using long lasting single walled kettle element
- System made available in thick gauge stainless steel finish with lid
support featuring 6 or 12 holes with concentric rings
- Made available with inner sizes of 300 x 250 x 100mm, 335 x 405 x 100mm
(lxwxd)
- System made available with options of 6 holes of 75mm dia with
concentric rings and 12 holes of 75mm dia with concentric ring support
- System working on heater load support of 1.0 kw, 1.5 kw
- Thermostatic based temperature control provision
- Mineral wool based insulation support that provides for maintenance
of inner temperatures
- System supporting temperature range from ambient +5°c to 95°c
±0.5°c.
- System works on electrical supply of 220/230v ac, 50/60hz
Specifications :
Inner Size (LxWxD) |
300 x 250 x 100mm, 335 x 405 x 100mm |
Capacity |
6 Holes Of 75mm Dia. With Concentric Rings 12 Holes Of 75mm Dia.
With Concentric Rings |
Heater Load |
1.0 KW, 1.5 KW |
Temperature Control |
Thermostatic |
Insulation |
Mineral Wool |
Temperature Range |
Ambient +5°C To 95°C ±0.5°C. |
Electrical Supply |
220/230V AC, 50/60Hz |
Applications :
Used in areas like
- Industrial clinical laboratories
- Academic facilities
- Government research laboratories
- Environmental applications
Dry Bath comes with outer body finish
designed using mild steel sheet that comes duly powder coated so as to
provide for efficient performance support. The system also comprises
presence of removable anodized aluminum blocks with provision of customizing
holes according to the requirements also make these highly desirable options
in involved laboratory and research applications.
The presence of microprocessor based PID digital temperature
indicator-cum-controller as well as pt-100 sensor placed in slot of aluminum
block also meets the demands of accurate functioning of the systems.
Features :
- Comes with mild steel sheet powder coated finish for outer body
- Inner chamber made available of anodized aluminum
- Based on microprocessor based digital temperature controller cum
indicator based temperature control
- System provides working with electrical supply of 220/230v ac,
50/60hz
Specifications :
MOC Outer |
Mild Steel Sheet Powder Coated |
MOC Inner |
Chamber Made Of Anodized Aluminum |
Temperature Range |
Ambient +5°C - 60°C ± 0.5°C |
Temperature Control |
Microprocessor Based Digital Temperature Controller Cum Indicator |
Block Size |
100mm x 80mm x 50mm |
Block Capacity |
1.5ml x 8 Tubes, 2.0ml x 8 Tubes, 0.5ml x 8 Tubes |
Overall Dimension (WXDXH) |
130mm x 240mm x 100mm |
Electrical Supply |
220/230V AC, 50/60Hz |
Applications :
Provides for controlled dry heat environment for test tubes used in
clinical and general chemistry applications including
- Restriction digests
- Denaturing DNA
- BUN
- Melting agar
- Coagulation studies
- Hot Start
- PCR